Lumi Industries

3D Printing resins, filaments and materials

Lumi Industries sells LumiReact 3D printing resins, Fep, post processing products and filaments. Official Italian distributor of Fun To Do 3D printing resins .

LumiReact Hard & Detailed 3D Printing Resin

LumiReact Hard & Detailed 3D Printing Resin


Tough and highly defined, for super detailed prints.

Add to Cart

3D printing resin LumiReact Hard & Detailed.

Lumi React Hard & Detailed is a 3D printing resin suitable for parts requiring a certain hardness and a very high definition.

This is a low viscosity high resolution photopolymer suitable to print miniature and figurines at 25-50 microns resolution.

It has an excellent surface definition and it comes in a opaque dark red color which allows to reproduce and visualize your models details with a very high quality.

It is water-resistant and once solidified it keeps intact its characteristics and forms at temperatures between -40 ° and + 110 °.
Contact us to confirm if they are compatible with your printer.

3D printing resin LumiReact HD characteristics

 Package    1 kg
 Color    opaque: dark red
 Viscosity        at 30°C         60 mPa.s
 Density        at 25°C         1.15 g/cm3
 Hardness (Shore D)         80

Finishing Instructions

  1. To clean and remove excess resin, agitate the 3D printed part in an ulkltrasonic cleaner with TEK1969 cleaning or in a simple vat with TEK1960 solvent* for 1-2 minutes.

  2. Do not soak in acetone. Do not leave the 3D part soaking in the liquid. Use a soft brush if necessary.

  3. Clean off any excess of liquid with a cold blowdryer or compressed air.

  4. Leave under the sun or in a UV lamp to cure. The resin is fully cured when fingernails do not leave scratch marks on the object.

  5. Even after full post cure some parts may still have a sticky surface. You can treat your print with Ta-Tack Away. A quick wash in this special formula will add a stick-free coating on the printed part.

*We do not recommend the use of denatured or isopropyl alcohol (IPA). It is very aggressive on the polymerized resin and it could weaken the structure of the 3D part. It is also flammable and potentially harmful to people and the environment.

Store the resin in a dry, cool, shaded place out of direct sunlight.

LumiReact HD