Castable 3D printing resin BlueCast X5

X5 Castable resin for LCD/DLP 3D printers: designed for professional use by the resin experts at BlueCast.

• Custom syntetized oligomer by BlueCast, not available to market, patent is going to be applied.

• Excellent casting of small engravings both positive and negative

• Fits all jewelry needs from filigree to medals as well dental ones Perfect for casting of small and fine detailed pieces.

• Excellent for stones presetting

• Curing triggering tuned to maximize antialias smoothing

• No monomer inside, no smell

• No aggression on plastic parts (tested on PS, PMMA)

• No postcuring needed for casting

• No shrinkage

• No primer needed

• Less spreeing needed, oxygen for burnout is released by resin during burnout (less scrap metal, less work on metal)

• Easy welding with wax, forget about pattern lost into investment

• Can be polished, engraved, drilled (postcure is needed) AAAAA

• Low viscosity, easier to recover uncured resin from models, easy to wash

• No preheating required

• Very little hygroscopic while liquid, no water absorption while printed

• Atoxic, solvent free, very low phospine content, very low skin irritant

• Fast and detailed - Hard but elastic, good compression set

• Cleaner burnout, 0,00% ash residual

• Solvent free

• Suitable for fast burnout

• Full burnout also at lower temperature (750 C°)

• No expansion during burnout, sublimation starts at 130 Celsius

• Burnout will not release aggressive chemicals to investment (80% of burnout is composed by carbon dioxide and water and oxygen that is used to complete combustion)

• Low tension surface (better surface, no need to treat models with spray or dip baths) - Excellent dimensional stability in time, no need to stock in cold/dark places

• Available for low power LCD, DLP and laser printers

• Shelf life 2 years

Fully compatible with all LCD printers and with all DLP machines with 385/405 nm Projector and FEP tank.

X5 Formlabs Blue Cast castable resin, compatible for SLA 3D printers available upon request.

3D printing Castable resin X5 characteristics